■The double parallel straight lines’ bottom and arris of glass can be processed at one time by rough, fine grinding and pneumatic polishing.
■All-in-one structure for machine and circuit box is good for waterproof, space saving and convenient for operation. The main body adopts cast iron with annealing treatment.
■Installed with excellent linear guide and screw mandrels which ensures the processing precision. Bracket of movable side system is W frame design, which increases the accuracy of movements and the degree of stability; also it can extend the life time of the linear rack
■Position corrected device has been added on the machine, which solves the deviate problem of small glass, and truly realize intelligent operation of connected machines when transferring glass.
■PLC control with touch screen, the data setting and the grinding status of glass can show on the controlling center. Processing width, thickness, and lifting of upper arris are adjusted automatically.
■The improved pneumatic polishing uses the high precision linear guide rail for guiding and this structure can make polishing more stable and reliable, as well as to save the grinding wheel effectively.
Glass Thickness | 3-12mm |
Min Processed Size | 350*350mm |
Max Processed Size | 2500mm(CGSY1225) |
Process Speed | 0.5-6m/min |
Working Height | 920mm |
Total Power | 29kw |
01 Reasonable Layout of wheels
Adopt famous ABB motors Enhance the grinding ability, increase the flat grinding speed, the effect is obvious for thick glass
02 Tidy circuit box
Adopts Schneider electrical components and Siemens PLC. All-in-one structure for machine and circuit box is good for waterproof, space saving and convenient for operation.
03 Variable frequency drive system
Frequency inverter with mandrel screw, Two big gears to make sure strong conveying.The synchronization of transmission is higher and the accuracy is more accurate.
04 Open-close control for glass processing width
The frequency conversion motor adjusts the opening and closing of the machine, which is accurate and stable, with a safety guard, the machine is more beautiful and safe.
05 Extra cutting quantity detect device
When the extra edge of coming glass touches this device, it will pass signal to PLC and the machine will be informed to slow down for this extra edge. Then the glass grinding and polishing quality will be much better.
06 Side pressure correction device
Input structure is with side pressure correction device, which is easy for adjusting and maintenance.