Glass equipment processing companies can not only better reduce business costs, but also improve their production efficiency. However, after many companies buy back related equipment, due to the lack of necessary common sense of maintenance, the mechanical equipment suffers serious loss during use, and even the mechanical equipment cannot operate normally.
Nowadays, most glass factories tend to use some more advanced glass processing equipment in the process of glass processing and polishing. For example, a fully automatic CNC glass edging machine is a major production equipment. The new glass edging machine has many differences from the traditional glass edging machine. It not only has a high degree of automation, but also can process very good quality mechanical equipment by inputting relevant parameters. Generally, glass edging machinery contains multiple processes, such as edging, chamfering, and polishing.
Although the new fully automatic CNC glass edging machine is very convenient to use, you must pay special attention to maintenance during the specific use process. After all, this equipment is still relatively expensive. If the service life of the mechanical equipment can be prolonged, this is also for the enterprise. It saves production costs and improves economic efficiency.
The daily maintenance specifications of the new glass edging machine:
1. When cleaning glass machinery and equipment, remove debris that is not related to production, and it is best to keep it cleaned once a day.
2. Replace the circulating water to prevent the glass powder from clogging the pump and water pipe.
3. The chains, gears, and screws of the glass edging machine should be filled with grease regularly.
4. When suspending use, keep the surrounding environment of the glass edging machine dry to prevent it from rusting.
5. Timely check whether the gap between the movable parts of the machine has become larger, which is helpful to maintain the accuracy of the processed parts.
6. When processing small pieces of glass with a glass edging machine, you must pay attention to whether the plywood is flat to ensure that the small glass is clamped smoothly
Post time: Jan-04-2021